Gold Member Since 2017
Audited Supplier
Wenzhou Funelec Electrical Co., Ltd.

Earth Leakage Circuit Breaker, Molded Case Circuit Breaker, Residual Current Circuit Breaker manufacturer / supplier in China, offering Earth Leakage Circuit Breaker Dz15le-100/490 100A, IEC Safety Standard Low Voltage 500V 32A 10X38 Fuse Holder, Surge Protective Device 10ka 20ka Surge Arrester and so on.

(/ )

Supplier Homepage Product Encoder Earth Leakage Circuit Breaker Dz15le-100/490 100A

Earth Leakage Circuit Breaker Dz15le-100/490 100A

This product is currently unavailable, but you may contact the supplier directly, for further interest.
Basic Info
  • Model NO.: DZ15LE
  • Working Principle: Incremental
  • Frame Size Current: 100A
  • Arc-Extinguishing Medium: Air
  • Trademark: FUNELEC
  • Origin: China
  • Type: Circuit Breaker
  • HS Code: 853620000, 85360000
  • Rated Operate Voltage V: 220V, 380V
  • Operation: Manual Type
  • Specification: CCC, CE
Product Description
Product Description
Application
DZ15LE series intelligent type earthleakage circuit breaker, is applied to distribution power-net of frequency 50Hz, Rated operate voltage 220V or 380V, Rated current up to 100A. And it provides indirect protection, it is also used to prevent the fire dange which cause by grounding fault becasue of equipment insolation damage.
And it is applied to distribute electric power and protect circuit band power-supply device against overload and short-circuit, and it also works for circuit unfrequently transfering and motor unfrequently starting.
This production conforms to the standard of IEC60947-2 and GB14048.2.
Normal operational conditions and installation conditions
3.1 Temperature: No higher than +40º C, and no lower than -5º C, and the day average temperature no higher than +35º C.
3.2 Altitude: No higher than 2000m
3.3 The relative humidity: No more than 50%, when temperature is +40º C. The product can withstand higher humidity under lower temperature, for instance, when it at +20º C, the production can withstand 90% relative humidity.
The condensation that happened because of temperature changes should be taken care.
And Installation location should have no exploresion danger, and no gas and conductive dust which can cause corrosion and insulation damage.
3.4 Class of pollution: 3 Calss
3.5 Maximum install inclined angle: 5° , it should be installed at the place without obvious impact and weather-influence. Upper terminal for power-supply side, Lower terminal for loading side.
3.6 Installation type: III
3.7 Installation electromagnetic environment: B type
3.8 External magneticfield of installation location should be exceed than 5 times of earth magnetic field.
For more details and information, please contact us with no hesitate
Send your message to this supplier
Avatar
Mr. Paul Jackson
Deputy General Manager
*From:
To: Mr. Paul Jackson
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category